Table of Contents
Advertisement
(Main Menu > Status > Diagnostics > Hardware > Analogue In)
Go Back to return to the previous screen or select Print to print the screen.
*Displayed in the Input column may also be the Thermocouple Active burnout status
Disabled
Normal
Degraded
134
Analogue In Status
• Channel - Displays the Slot position eg. A, B, or C, D, E, F, the Analogue Input number
and the system channel position. This will show a tick if this channel is enabled.
• Input - Displays the current Analogue Input reading for this channel. *
couple Active Burnout Status" on page 134.
• Range - Displays the current Range Type set for this channel, eg. +/-12V
• Calibration - Displays the type of calibration for this channel either Factory or User Cal
• Sample Rate - Displays the current Sample rate for this channel.
• SQRT - If ticked the square root extract is enabled on this channel to linearise a non-lin-
ear input.
• Sensor Comp - This will display if any type of sensor compensation applied to this
channel.
• Pen - Displays which Pen scale is being used to display this analogue input.
• CJC - Only for Thermocouple inputs. Displays the final adjusted value of a Cold Junc-
tion Calibration on this channel in degrees C.
Table 4.11 : Thermocouple Active Burnout Status
Label
Active burnout disabled
Active burnout enabled, input ok
Thermocouple degraded (difference measurement: 10
Power up
Descriptions
See "Thermo-
Ω
Ω
to 99
increase**)
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Advertisement
Table of Contents
