Table of Contents
Advertisement
Enter the IP address from the recorder that you noted earlier. If you don't know it select the
"Look up IP Address" button. The other method is to select the "Find Device" button. This
will search for all SIREC D200, D300 and D400 recorders on the network using their Net-
work ID, eg xs-nnnnnn (where "nnnnnn" is the recorder's serial number).
Give a name for the recorder. This should be something recognisable, all recorders should
be given different names. Press OK.
On pressing "OK", then "Done" you will return to the External Import dialog box as above.
Check that "Setup only" and "from Network" are still selected. Then drop down the list and
select the recorder you have just added. The recorder name and IP address are in the list.
Finally select "Import", SIREC - Server will download the setup from the recorder and this
will be displayed in a setup window. Press OK and this recorder setup will be added to the
recorder list.
Note: The recorder will be added to the list under the Recorder Name as set in the re-
corder itself. (This is the name that appears in the top right corner of the recorder
screen when in normal logging mode) NOT the name you gave the recorder when set-
ting up the FTP.
180
Comms and SIREC D software
Or for Ethernet connections the setup can be
down-loaded from the recorder via FTP.
Select "Setup only" as shown, but change
"from directory" to "From Network (FTP)".
When "From network" is selected the dialog
box will change.
Hit the "Set up" button. The dialog box that
comes up will allow you set up your recorder
to allow FTP transfers.
Press the "Add" button to add a new record-
er to the list.
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Advertisement
Table of Contents
