Table of Contents
Advertisement
Communications Server
Find Device
This can be used to find SIREC
D200, D300 and D400 recorders
on the network. It uses the record-
er's unique Network ID to identify
them and populate this list. Select
your device from the list and press
the Use Selection button to insert
the recorder details into the Add
Device box.
When you get back to the Add De-
vice Detail Box, press "OK".
The recorder you have set up will
now be added to the device list.
Add a Device via RS485
Setting up the Comms Server for Modbus on RS-485 follows the same procedure, but the
PCs comm port that the 485 interface is connected to is selected in the "Communications
Port" drop down list. Everything else is the same (there is no IP address to enter) and test
should still work the same.
188
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Advertisement
Table of Contents
