Table of Contents
Advertisement
For layouts to be loaded into the recorder Custom Screens must be enabled as a Firmware
option.
See "Firmware Options" on page
168.
It is recommended to save Screen Designer layouts directly from the software onto a Com-
pact Flash or USB key. This will contain all the files required for loading the layout into the
recorder. If the Screen Designer layout is saved to another location before being transfered
onto removable media, ensure that both the .bcf and .lay files are copied over. A warning
message will appear if the .bcf file is missing.
Loading a Template into a Recorder
One or more Templates can be loaded into a recorder, added to a recorder screen or
screens and displayed. To save a template in Screen Designer onto removable media refer
to the Screen Designer manual.
Fit the removable media into the recorder and go to Main Menu > Configure > Layout and
select Load. The Device selection menu will appear to select the correct media. Enter a new
file name if required and press the Load button.
Go to Main Menu > Configure > Layout > Edit and select Add Screen. Go to the Template
Type option and your template will be listed here. Select your template and it will be added
to a screen, re-name the screen as required.
To display the new Layout go to the Screen button in the Main menu bar at the top of any
process screen and select the next button to scroll through the screens.
Loading a Layout into a Recorder
One or more Layouts can be loaded into a Recorder and displayed. To save a Layout in
Screen Designer onto removable media refer to the Screen Designer manual.
Fit the removable media into the recorder and go to Main Menu > Configure > Layout and
select Load. The Device selection menu will appear to select the correct media. Select the
desired layout and press the Load button.
Go to Main Menu > Configure > Layout > Edit and the new layout will be loaded into the list
of Screens. If the Custom Screens option is disabled the screens will not display.
To display the new Layout go to the Screen button in the Main menu bar at the top of any
process screen and select the next button to scroll through the screens.
Bitmaps
Bitmaps can be inserted into a layout in Screen Designer and then loaded into the recorder
just like any other layout (.lay).
166
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Advertisement
Table of Contents
