Table of Contents
Advertisement
Batch Mark on Chart
A Batch marker will be placed on all process screens that have a chart displayed. The mark
on chart will show where the batch is started with //S (Batch Name).
The next time you press the Batch button the screen will have changed to give you the Batch
Controls. The batch control buttons enable the user to Stop, Pause (Resume), Abort or add
a Comment to the current batch that has been started.
A Batch is complete when it has been stopped. When a batch is stopped //E appears as a
mark on chart on the screen. If the batch is aborted it is not a complete batch and will be
marked on the chart with an //A to show it has been aborted.
If the recorder is not logging, starting a batch will automatically start the logging. However
stopping the batch will not stop the logging.
If a batch is Paused //P will appear as a mark on chart and the Pause button on the Batch
Control menu is replaced with a Resume button. When Resume is selected the screen will
be marked with //R.
118
Power up
Figure 4.15 Batch Control screen and Messages screen
This icon changes to show
a batch is in progress
43-TV-25-35 GLO Iss.4 Dec 06 UK
Start Batch
Mark on Chart
A5E01001767-04
Advertisement
Table of Contents
