Table of Contents
Advertisement
(Main Menu > Status > Diagnostics > Comms)
This screen contains a description of the type of comms currently being used and its status.
(Main Menu > Status > Diagnostics > Comms > General)
.
(Main Menu > Status > Diagnostics > Comms > Modbus)
Description and Status of ModbusTransport - Ethernet or RS485
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Comms Status
See "General Status" on page 137
• General -
See "Modbus Status" on page 137
• Modbus -
See "OPC Status" on page 138
• OPC -
See "SMTP Status" on page 138
• SMTP -
See "FTP Status" on page 139
• FTP -
See "Peers Status" on page 139
• Peers -
General Status
• Description and Status of comms on the recorder. Displays Ethernet or RS485 in an
Active or inactive state and the recorder's IP address
Modbus Status
• Transport - Ethernet or RS485
• Address - the IP address of your recorder and if it is fixed or Dynamic
• Device ID - Recorder ID number
• Protocol - Modbus or Modbus-X
• Good Messages - Number of messages being transferred successfully
• Bad Messages - Number of corrupt or rejected messages eg. a checksum failure
• Internal Errors - Number of Hardware errors
Power up
137
Advertisement
Table of Contents
