Table of Contents
Advertisement
Chart background colour and graduations and the chart background colour when the record-
er goes into an alarm state can all be changed. The same set of characteristics can be
changed for a chart in Replay mode using the colour picker. The colour of the Time Stamp
at the top of the chart and Marker (Mark on Chart) can also be changed.
The Default button will return all colours to their original factory settings.
On the right side is a selection of default colours which can be used as they are. When a
colour is selected it will appear in the New box with the Current colour next to it. Use the
sliders labelled Red, Green and Blue to vary the colour displayed in the New box. As you
move the slider the colour shade number will change in the box below the slider.
If a specific colour is required, enter the colour number by selecting the box under the Red,
Green and Blue sliders and the colour will be change accordingly in the New box.
When the desired shade has been chosen, select the tick box to confirm you choice. Each
new colour will be saved and will appear in the Recent tab.
106
Appearance
• Chart/Graduations - This will change the colour of the graduation lines on the chart
• Chart/Colour - This will change the colour of the background of the chart
• Chart/Alarm - This will change the colour of the background of the chart when it goes
into an alarm state
• Replay/Graduations - This will change the colour of the graduation lines on the chart
when the recorder screen is in Replay mode
• Replay/Colour - This will change the colour of the background of the Replay chart
• Replay/Alarm - This will change the colour of the Replay chart when it goes into an
alarm state
• Time Stamp - This will change the colour of the time stamp/and date at the top of the
screen
• Marker Colour - This will change the colour of any Mark on Chart displayed on the
screen
The Colour Picker
Power up
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Advertisement
Table of Contents
