Section 2: Installation; Environment And Location - Siemens SIREC D200 Manual

Display recorders
Hide thumbs Also See for SIREC D200:
Table of Contents

Advertisement

Section 2: Installation

Damage checks
Any damage caused to the recorder or the contents should be reported immediately to your
shipper.
Unpacking
Remove the contents, check the packaging and remove all documentation and accessories
supplied. Retain the box and any packaging for future transportation.
Contents
Check that the contents and accessories are correct against the order or Model Selection
Guide using the model number on the recorder. Contact SIEMENS immediately should
there be any query.
The contents are based on Unit Model Number ordered and will vary from unit to unit. The
following list is provided as a general guide and not specific to any single unit.
Re-packing
NOTICE
Should the original packing be destroyed or lost, new packaging can be ordered or as a
last alternative, then ONLY pack the recorder in polystyrene granules if the recorder is
FIRST sealed in a strong plastic bag. Failure to do this will invalidate your warranty.

Environment and Location

43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
• Recorder - specification as ordered (check against the Model Selection Guide)
• Mounting fixings - Mounting clamps and panel gasket
• Connector kit - mating half connectors to recorder spec. Including a CJC connector for
Thermocouple operation.
• Quick Start Guide - to get you started
• First time Password system instructions - for ESS recorders only
• CD - Viewer software + documentation
• Plastic stylus x 2 (for use with the touch screen)
• Manual (optional) - Hard copy English, French or German
• Any other items ordered as an option
• The recorder is designed to be mounted into a panel.
tions" on page 9.
• Mounting angle is unlimited. Choose a suitable location with an ideal viewing angle.
See "Mounting and Viewing Angles" on page 6.
• The location should be free from vibration.
• The environment should be of non-condensing humidity.
• The ambient temperature should be between 0
• The relative humidity should be between 10% to 90%.
See "Installation Instruc-
°
°
°
C and 50
C (32
F to 122
°
F).
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sirec d300Sirec d400

Table of Contents