Siemens SIREC D200 Manual page 88

Display recorders
Hide thumbs Also See for SIREC D200:
Table of Contents

Advertisement

A scheduled event can be set up as a cause so that when a scheduled event occurs it trig-
gers an effect. With scheduled events you can specify the time and date for something to
happen. Eg. A schedule can be setup every weekday at 12.00pm to send an Email.
82
Power up
Event Causes
• Alarms - Set to cause an event when a pen goes Into Alarm, Out of Alarm or an Alarm
is Acknowledged. Set the pen number and the Alarm that will trigger this event.
• Totalisers - Set to cause an event when a totaliser Starts, Stops or is Reset. Select
which pen has been set up as a totalise pen to trigger this event
• Digital Inputs - Set to cause an event when a Digital Input is turned On, Off or has a
State change. Select the Digital to trigger this event.
• TC Burn Out - Select which analogue input has a thermocouple on that will trigger this
event when it goes into a burnout state.
See "Scheduled Events".
• Scheduled -
See "User Counters" on page 83.
• User Counters -
• Max Mins (Reset) - A manual reset of the Max/Min values by the user can be used as a
cause to then trigger an effect. Max Min values can be reset in the process menu, see
"Max/Min" on page 125
Scheduled Events
• Enabled - Tick to enable
• Type - Scheduled
• Sub Type - Set Once, Interval, Specific Days or Month End
Once – This is a once only occurrence
Interval - A scheduled can be setup at timed intervals eg. every 12 hours.
Specific days - Select the day(s), time and how often (count) the schedule will occur
Eg. Friday at 12.00 with a count of 10 will carry on for 10 weeks or Monday through to
Friday at 12.00 with a count of 10 will carry on for two weeks.
Month End - If Month End is selected with a count of 10 it will carry on for 10 months.
The recorder refers to a built in calendar and clock and will schedule the event to occur
at midnight on the last day of each month.
• Date/Time - Only available when Once is selected as a Sub Type. Select the time and
date for a one off occurrence.
.
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sirec d300Sirec d400

Table of Contents