Siemens SIREC D200 Manual page 136

(Main Menu > Status > System > IO Cards)
This will display the Slot position of each card in the recorder. The Card Type is identified
as Analogue I/P, Alarm/Digital I/O, Analogue O/P or Pulse Input. The number of Channels
on each card eg. Digital I/O 1-16. The Firmware Version of the card is displayed and the
Board Revision.
Slot
A
B
G
Go Back to return to the previous screen or select Print to print the screen.
Pen Overview
(Main Menu > Status > Pen Overview)
Each pen is displayed with full configuration details.
Go Back to return to the previous screen or select Print to print the screen.
130
IO Cards
Table 4.10 : Example of IO Card Status for a SIREC D300
Card Type
Analogue I/P
Pulse
Digital I/O
• Pen - Displays the pen number and ticked if it is enabled
• Value - Displays the current reading for this pen
• Name - Pen name or number
• Maths - Displays any Maths calculation applied to this pen or the Analogue Input chan-
nel for this pen. Summarised to M for any Maths expressions.
• Scale - Displays the High and Low limits of the scale range for this pen
• In Alarm - Displays the current status of the alarm, tick = active and a cross = inactive.
• Pen Rate - This displays the fastest of all dependencies
• Alarm - Displays how many alarms are enabled on this pen
• Total - This will be ticked if a totaliser has been enabled on this pen
• Group - Displays the group number if this pen has been allocated to a group.
Power up
Channels FW Version
1-8 A*-00*
9-12 A*-00*
1-16 A*-00*
Board Revision
0
1
0
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04