Table of Contents
Advertisement
Power up
Parent Pens
This does not apply to charts as charts normally have more than one pen displayed. The
parent channel is the initial channel to be configured on a widget. All objects added to a wid-
get (except charts and pen pointers) automatically default to using the parent channel. The
parent itself allows the user to quickly make all of their objects update to use the pen number
indicated by the parent.
Replay
(Main Menu > Screen > Replay)
The Replay button takes you to the process screen in replay mode. The Replay screen con-
sists of a chart and DPMs. The chart is vertical or horizontal depending on the orientation of
the screen you have come from. The replay screen has DPMs that display max/min readings
for each pen, these values are taken from where the cursor is positioned on the screen. For
full details see
"Replay" on page 158.
Screen List
(Main Menu > Screen > Screen List)
The Screen button produces a list of all available screens. Select to make this the current
screen active on the recorder.
To add a new screen, go to Add Screen in: Main Menu > Configure > Layout >
"Edit Lay-
out" on page 104
Clean Screen
(Main Menu > Screen > Clean Screen
The Clean Screen function disables the touch screen for 30 seconds so that the screen can
be cleaned. A dialog box will appear informing you "You have 30 seconds to clean the
screen. Press escape if you wish to close this dialog early". The escape key option would
only be available if a USB keyboard was plugged in. The box will also display a time bar to
show the 30 seconds of time lapsing.
See "Cleaning Instructions" on page
217.
Calibrate
(Main Menu > Screen > Calibrate)
Your touch screen on the recorder is calibrated before leaving the factory. If when you use
the recorder the screen does not match where you are touching it then calibration will be
required. Select the Calibrate button and follow the on-screen instructions to calibrate the
touch screen.
Touch Test
(Main Menu > Screen > Touch Test
Use the Touch test feature to see if your touch screen is calibrated correctly. Select this but-
ton and touch the screen using the stylus. If the centre of the cursor follows the stylus around
the screen then the touch screen is calibrated correctly. If the centre of the cursor is not
where the stylus is touching the screen then go to the Calibrate button and recalibrate the
screen.
116
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Advertisement
Table of Contents
