Table of Contents
Advertisement
Specification
Mechanical Shock
Acceleration (g)
Duration (ms)
Mounting Position from Vertical
Tilted Forward
Tilted Backward
Tilted to Side (+/-)
Power Requirements
Mains Voltage (Vrms)
Low Voltage AC (Vrms)
DC Voltages
Frequency (Hz)
Power Consumption
Warm Up
Seismic Qualification
* The maximum rating only applies up to 104°F (40°C). For higher temperatures, the RH spec is de-rated to maintain constant moisture content
LED Flash Codes
LEDs are fitted on the Analogue Input card, Analogue Output card, Pulse Input card, 4 and
8 Alarm Relay cards and the 8 and 16 Digital IO cards. The LEDs can be seen through six
holes on the left side of the D300/D200 recorders, and 18 holes on the D400 recorder (look-
ing from the front).
1,1
2,2
3,3
4,4
1,2
1,3
Red LED flash codes relate to the first fault stored in the error buffer. With no faults, the red
LED remains off.
When the red LED is flashing, the green LED stays lit. The green LED flashes for normal
operation. The board outputs the flash code for about 30 seconds after it was registered.
230
Specification Tables
Environmental and Operating Conditions
0
0
5°
5°
5°
220 to 240
24 +/- 2
24 +/- 2
49.8 to 50.2
D300/D200: AC: <40W (max), DC: <40W (max) Typical 20W.
D400: AC: <60W (max), DC: <60W (max) Typical 30W
30 minutes minimum
Complies with IEEE 323-1974 and/or 1983 and IEEE 344-1975 and/or 1987 (option). Hard-
ware includes an IEC bracket.
Red LED
Flash codes:
flash once, pause, flash once, pause etc
flash twice, pause, flash twice, pause etc
flash three times, pause, flash three times, pause etc
flash four times, pause, flash four times, pause etc
flash once, pause, flash twice more quickly, pause,
flash once etc (added as CJC could be unplugged...)
If another error is also present with CJC error, flash
once, pause, flash 3 times
1
5
30
30
40°
40°
65°
65°
65°
65°
100 to 250
90 to 264
20 to 30 D300/D400
20 to 30 D300/D400
20 to 25 D200
20 to 25 D200
20 to 55 D300/D400
20 to 55 D300/D400
20 to 30 D200
20 to 30 D200
47 to 63
47 to 63
Table 12.3 :
Sequence:
20
30
Any
Any
Any
N/A
N/A
N/A
N/A
Type of Fault:
Hardware
Communications
Memory
Other
CJC fault
CJC fault +
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Advertisement
Table of Contents
