Table of Contents
Advertisement
(Main Menu > Configure > Passwords > User Admin > Policy)
At the top of the Policy menu are four levels to be assigned, these are the permission levels
that will allow access to specific areas of the recorder menu system. The names of these
levels can be edited here.
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Policy
•
Pwds Enable = Tick to enable the password menu
• Level 0 Name = Administrator. Highest permission level
• Level 1 Name = Engineer. Second highest permission level
• Level 2 Name = Supervisor. Third highest permission level
• Level 3 Name = Technician. Fourth highest permission level
• Level 4 Name = Operator. Fifth highest permission level
• Unrestrict - allows the Administrator to de-restrict access to certain areas so menus will
be available even without logging in.
• Menu Timeout Enable - Tick to activate the timeout facility to be enabled on the
menus. (This is always enabled for ESS).
• Menu Timeout - Set a specific time period of inactivity in a password protected area
before logging out. (20 to 3600 seconds)
• Web Timeout Enable - Tick to activate the timeout facility to be enabled on the web
page. (This is always enabled for ESS).
• Web Timeout - Set a specific time period of inactivity in the web page before logging
out. Enter the time in seconds. (20 to 3600 seconds)
• Old Passwords - Select how many previously used passwords are locked from use as
a new password. (Max.12 previous passwords, 0 for disabled) Cannot be disabled for
ESS recorders.
• Username Max - Set the maximum amount of characters that can be used for the User
name login. (1 to 20 characters, 4 to 20 for ESS recorders)
• Password Max - Set the maximum amount of characters that can be used for the Pass-
word login. (1 to 20 characters, 6 to 20 for ESS recorders)
• Username Min - Set the minimum amount of characters that can be used for the User
name login. (1 to 20 character and 0 will disable, 4 to 20 characters and no disable for
ESS recorders)
• Password Min - Set the minimum amount of characters that can be used for the Pass-
word login. (1 to 20 characters, 0 will disable, 6 to 20 characters and no disable for ESS
recorders)
• Min Alpha - Set the minimum amount of alpha characters to be used in the Password.
(0 to 20 characters)
• Min Symbol - Set the minimum amount of symbol characters to be used in the Pass-
word. (0 to 20 characters)
• Min Numeric - Set the minimum amount of numeric characters to be used in the Pass-
word. (0 to 20 characters)
• Pass Retries - Set how many times the incorrect password can be entered before the
user account is locked out. (1 to 10 retries, 0 will disable, 1 to 6 retries and no disable
for ESS recorders)
Power up
109
Advertisement
Table of Contents
