Table of Contents
Advertisement
When the batch is stopped the Batch Control screen reverts back to the Batch Setup screen
so the user can start a new batch.
As well as a Mark on Chart for every command applied to the batch you can check the Mes-
sages screen for details of the batch activity.
then be read using a barcode wand or reader. Any type of Batch marker can be encoded
into a barcode using the same control characters used to build up a batch marker.
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Batch Commands
• //S = Start Batch
• //E = End or Stop Batch, this will complete the batch run
• //P = Pause the batch in progress
• //R = Resume batch. Only available when a batch has been paused
• //A = Abort batch. If the batch is aborted it is incomplete and the batch will be cancelled
• //I = User ID. Displays the user entered ID or User ID entered automatically by the Pass-
word function.
• //D = Description. User entered description of the batch in progress
• //L = Lot No. User entered Lot number for the batch in progress
• //C = Comment. Extra comment field of additional information for the batch in progress
Barcodes for Batch
Batch markers can be created using independent barcode software. The barcodes can
This example shows a barcode encoded to start a batch:
//S = Start Batch
216 = Batch Name
//I = User ID is Fred
//C = Comment text is Test
• A barcode with up to 25 characters (including spaces) can be read into the recorder
using a USB ASCII barcode reader.
Power up
"Batch Setup screens" on page 117.
119
Advertisement
Table of Contents
