Table of Contents
Advertisement
Comms Server Setup
Add a Device
There are three ways to add a device, they all deliver the same dialog box:
Double click the ethernet icon in the left column. This will activate ethernet, the red cross will
change to a tick.
Now the recorder must be added. To do this click the "add new device" button, The first in
the row of three. This will bring up the Device Details box.
All these methods will produce the Add Device Details box. Areas of the box become greyed
out as the selections are made.
186
Communications Server
1. Use the device icon in the top left of the comms server window.
2. Right click on a selected Comms port in the left window, COM1 to COM8 or Ethernet
and select Add Device from the resulting menu.
3. Select a Comms port and right click in a blank space in the top window and select Add
Device from the resulting menu.
Add a Device via Ethernet.
• Protocol - The protocol should be matched to that set on the recorder. It will be Modbus-X
by default so leave it at that unless you changed it on the recorder. For active Modbus
devices, the recorder name and protocol variant can be changed (Modbus vs Modbus X).
For an inactive Modbus device the device profile can also be changed.
• Modbus Profile - The Profile name box is used to tell
data on the recorder. This profile is automatically generated from the recorder setup that
SIREC - Server
was downloaded to
SIREC - Server
previously.
43-TV-25-35 GLO Iss.4 Dec 06 UK
how to access the
A5E01001767-04
Advertisement
Table of Contents
