HOW TO INSTALL THE PRODUCT
1 - How to attach I/O module to E-Hub 2.0
55 | © 2019 ABB | DOC. N° 1SDH002109A1001 - ECN000125349 - Rev. A
•
Attach the I/O additional module 10-12-xx unit to the E-Hub 2.0 as shown below using
M2.5 x 5 CAP Head screw.
•
Screw the I/O additional module module mounting plate to the same flat surface as the
E-Hub 2.0
Fig. 33
Which screws are used
The 4 screws are used to attach I/O module to E-Hub 2.0:
•
M2.5 x 5 CAP Head Hexagon Socket
•
Black A4 Stainless steel, fully threaded
Fig. 34
HOW TO INSTALL THE PRODUCT | How to attach I/O module to E-Hub 2.0
ABB | E-Hub 2.0