Siemens SINAMICS G130 Engineering Manual page 279

Rated power at Active Line Modules (incl. Active Interface Modules)
400 V Order No.
[kW]
Supply voltage 380 V – 480 V 3AC (DC Link Voltage 570 V – 720 V)
132 6SL3730-7TE32-1BA0
160 6SL3730-7TE32-6BA0
235 6SL3730-7TE33-8BA0
300 6SL3730-7TE35-0BA0
380 6SL3730-7TE36-1BA0
500 6SL3730-7TE38-4BA0
630 6SL3730-7TE41-0BA0
630 6SL3730-7TE41-0BC0
900 6SL3730-7TE41-4BA0
900 6SL3730-7TE41-4BC0
Rated power at
500 V resp. 690 V
[kW]
Supply voltage 500 V – 690 V 3AC (DC Link Voltage 750 V – 1035 V)
400 / 560 6SL3730-7TG35-8BA0
580 / 800 6SL3730-7TG37-4BA0
580 / 800 6SL3730-7TG37-4BC0
800 / 1100 6SL3730-7TG41-0BA0
800 / 1100 6SL3730-7TG41-0BC0
1015 / 1400 6SL3730-7TG41-3BA0
1015 / 1400 6SL3730-7TG41-3BC0
Order Number assignment for Active Line Modules
Please note that parallel connections can only be made with Active Line Modules and the associated Active Interface
modules of exactly the same power rating. The potential for imbalances in current distribution means that current
derating of 5 % must be applied and this must be taken into account when the Modules are dimensioned.
Information on parallel configurations in the chapter "Fundamental Principles and System Description" and also on
the use of DRIVE-CLiQ cables and how to install them in the sections "Information about equipment handling" and
"DRIVE-CLiQ wiring" must be noted.
SINAMICS S120 Cabinet Modules
For parallel connection, mounted on left of LCM
(mirrored mounting)
For parallel connection, mounted on left of LCM
(mirrored mounting)
For parallel connection, mounted on left of LCM
(mirrored mounting)
For parallel connection, mounted on left of LCM
(mirrored mounting)
For parallel connection, mounted on left of LCM
(mirrored mounting)
SINAMICS Engineering Manual - May 2008
Engineering Information
279/396
© Siemens AG