Siemens SINAMICS G130 Engineering Manual page 219
Hide thumbs
Also See for SINAMICS G130:
- List manual (1976 pages) ,
- Operating instructions manual (610 pages) ,
- Engineering manual (530 pages)
Table of Contents
Advertisement
Device
CU320, D4xx
Basic Line Module
Smart Line Module
Frame size GX:
Frame sizes HX and JX
Active Interface Module
Frame size FI
Frame size GI
Frame sizes HI and JI
Active Line Module
Frame sizes FX and GX
Frame sizes HX and JX
Motor Module
Frame size FX und GX
Frame size HX und JX
Liquid Cooled
DC / AC Basic Line Module
DC / AC Active Line Module
DC / AC Motor Module
AC / AC Power Module
DRIVE-CLiQ cables supplied with the chassis units
For units in Booksize format the DRIVE-CliQ cables are supplied in the relevant width to make the connection to the
next following module.
Supplied DRIVE-CLiQ cables (pre-assembled)
--
1 x
0.6 m DRIVE-CLiQ cable for connection to the Control Unit
1 x
1.45 m DRIVE-CLiQ cable for connection to the first Motor Module
1 x
0.6 m DRIVE-CLiQ cable for connection to the Control Unit
1 x
0.3 m DRIVE-CLiQ cable for connection to the Control Unit
1 x
1.2 m DRIVE-CLiQ cable for connection to the first Motor Module
1 x
0.6 m DRIVE-CLiQ cable for connection of the Voltage Sensing Module in
AIM to the Active Line Module
1 x
1.45 m DRIVE-CLiQ cable for connection to the first Motor Module
1 x
0.95 m DRIVE-CLiQ cable for connection of the Voltage Sensing Module in
AIM to the Active Line Module
1 x
1.45 m DRIVE-CLiQ cable for connection to the first Motor Module
1 x
2.4 m DRIVE-CLiQ cable for connection of the Voltage Sensing Module in
AIM to the Active Line Module
1 x
0.6 m DRIVE-CLiQ cable for connection to the Control Unit
1 x
0.35 m DRIVE-CLiQ cable for connection to the Control Unit
1 x
2.1 m DRIVE-CLiQ cable for connection to the first Motor Module
1 x
0.6 m DRIVE-CLiQ cable for connection to the next Motor Module
1 x
0.35 m DRIVE-CLiQ cable for the connection to the Control Unit
1 x
2.1 m DRIVE-CLiQ cable for connection to the next Motor Module
1 x 0.6m DRIVE-CLiQ cable for connection to the Control Unit
1 x 0.6m DRIVE-CLiQ cable for connection to the Control Unit
1 x 0.6m DRIVE-CLiQ-cable for connection of the Voltage Sensing Module in
AIM to the Active Line Module
1 x 0.6m DRIVE-CLiQ cable for connection to the Control Unit
1 x 0.6m DRIVE-CLiQ cable for connection to the Control Unit
Engineering Information
SINAMICS Engineering Manual - May 2008
© Siemens AG
SINAMICS S120
219/396
Hide quick links:
Advertisement
Table of Contents
