Table of Contents
Advertisement
ing".
•
For the same reason the transmitter must al-
ways be updated to the latest software status.
•
It is essential that you register at https://www.
graupner.de/en/service/product_registration.
aspx to ensure that you are constantly in-
formed of important software updates. This is
the only means by which we can automatically
keep you aware of new updates by e-mail.
Importing/exporting model memories
Any model memory can be stored to an inserted
memory card or from an inserted card into the trans-
mitter. This feature is intended to support data ex-
change between identical transmitters or even use
as data backup. More information about this can be
found in the section »Copy / Erase« beginning on
page 80.
Notes:
•
Some special symbols that can be used in model
names are subject to specific restrictions associat-
ed with the FAT or FAT32 file system used by the
memory cards and these special symbols will be
replaced during the copy process with a tilde (~).
In principle the model memories of the mx-20 and
•
mc-20
transmitters are compatible, BUT:
If you wish to carry out an "Import from SD card" in
the other transmitter you must first copy or move
the appropriate model memory to the appropriate
folder on a PC. For example: from \\Models\mc-20
to \\Models\mx-20, or vice versa.
See page 82 for more information on "Import
from SD card".
C A U T I O N :
After you have carried out an "Import from SD
card" it is absolutely essential to check all the
model functions with great care. Note also that the
transmitter control and switch functions may need
to be adjusted to suit the new transmitter.
Mini-USB connector
mc-16
The right-hand side flap of
20
HoTT transmitters provides access to the soft-
ware update socket, which is also used for altering
the date and time via a PC using the Windows XP,
Vista or 7 operating system; this socket is located on
the right-hand side under the flap:
The USB cable, order no. 32032, which is included
with the set is to be connected to this jack. The pro-
cedure for carrying out a software update via a PC is
described on page 50.
The PC software required, as well as the suitable
USB driver, can be found on the download page for
the given product on the Graupner website at
www.graupner.de.
Once the necessary driver and software is installed
on the PC, this USB connection can be used to up-
date the transmitter or even just to set the transmit-
ter's date and time. To set the transmitter's date and
time by way of this jack, refer to the »Info display«
menu, beginning page 278.
Note:
mc-16
mc-20
HoTT and
HoTT transmitters can
also be charged using this USB socket at the stand-
ard currents present at USB ports; see page 16.
mc-
HoTT and
Transmitter description - Face-side connections
25
Advertisement
Table of Contents
