GRAUPNER HoTT MC-16 Series Programming Manual page 102

Base setup model
DSC Output
Autorotation
Auto.C1 Pos. –66%
cut off –125% +100%
SEL STO
Notes:
• Be sure the throttle servo does not run out me-
chanically when the cut-off function is activated.
• A threshold over +100 % is reached by tempo rarily
increasing the travel for servo 1 in the »Servo ad-
justment« menu to over 100 % then, after storing
the threshold, change servo travel back to the
original value.
Auto timer reset
Base setup model
Autorotation
Auto.C1 Pos. –66%
cut off –125% +100%
Auto timer reset
The "yes/no" setting made in this line determines
whether or not all of the transmitter's timers (except
for "Model time" and "Transmitter operating time") are
automatically reset to their given starting values when
the transmitter is switched on. In contrast, the "slot
time" – see page 163 – is always reset to the starting
value when the transmitter is switched on.
A simultaneous tap on the  or  keys of the
right four-way button (CLEAR) will reset the display to
"yes".
102 Program description - Base setup models | Helicopter models
PPM10
–––
9
18
–––
9
18
yes
SEL