GRAUPNER HoTT MC-16 Series Programming Manual page 143

Starting from the situation in the previous illustration,
first press the SET button of the right-hand four-way
button to conclude the procedure. Use the Select but-
ton  of the right-hand four-way button to move up to
the Value field of the "Curve" line, then press the
button of the right-hand four-way button once more:
Ch1 cur ve
Cur ve off
Input –50%
Output 0%
1
Point 0%
nor mal
Now press one of the Select buttons of the right-hand
four-way button in order to switch from "(Curve) off" to
"(Curve) on" (or vice versa).
Ch1 cur ve
Cur ve on
Input –50%
Output 0%
Point 1 0%
nor mal
Note:
The curves shown here are for demonstration pur-
poses only and are not at all representative of real
throttle or airbrake curves. A specific application
example can be found in the programming examples
on page 285 and 323.
SET
Program description - Channel 1 curve | Helicopter models 143