Table of Contents
Advertisement
Free mixers
Freely-programmable linear and curve mixers
mc
This option is available as standard on
both transmitter types.
16 20
Use the selection keys of the left or right
four-way button to scroll to the »Free mix-
ers« menu option in the Multi-function menu:
Fl. phase timers
Wing mixers
Free mixers
MIX active/phase
MIX-only channel
Dual mixer
Fl. phase timers
Helicopter mixer
Free mixers
MIX active/phase
MIX-only channel
Dual mixer
Open this menu option with a tap on the center
key of the right four-way button.
Regardless of the model type selected, each of the
mc-16
mc-20
20 (
HoTT) or 24 (
memory locations offers eight linear mixers (M1 ... 8)
...
M1
??
??
M2
??
??
M3
??
??
M4
??
??
M5
??
??
fr
... and 4 curve mixers (C9 ... 12), which also offer
non-linear control characteristics:
M8
C9
C10
C11
C12
The »MIX act. / phase« menu, see page 215, which
is available as standard on the
mitter only, but can be unlocked at extra cost on the
mc-16
HoTT transmitter, also provides a means of
activating and disabling specific mixers separately
for each flight phase. On the "Free mixers" menu,
the blocked mixers are then suppressed in the
corresponding flight phase. If you are hunting for
a mixer that is not shown, you should therefore
switch to the appropriate flight phase!
In this first section, however, we will concentrate on
how to program the first screen page of the "free mix-
ers". We will then move on to the method of program-
SET
ming mixer ratios, both for linear mixers and curve
mixers, as found on the second screen page of this
menu.
HoTT) model
Basic programming procedure
1. Select the mixer you want by using the selec-
tion keys on the left or right four-way button.
2. Tap the center
ton. The input field on the column marked "fr" at
the lower edge of the screen is now shown high-
lighted.
3. Use the selection keys on the right four-way button
to select the "fr" mixer input.
Additional column names now appear in the bot-
tom line of the screen.
4. Tap the center
ton; using the selection key of the left or right
four-way button, switch to the column marked "to"
at the lower edge of the screen then tap the center
??
??
??
??
??
??
??
??
??
??
fr
mc-20
HoTT trans-
SET
key of the right four-way but-
SET
key of the right four-way but-
SET
key of the right four-way button once again.
The input field "to" is shown highlighted.
5. Use the selection keys on the right four-way button
to select the "to" mixer output.
6. Tap the center
SET
key of the right four-way but-
ton. Optionally use the selection key of the left
or right four-way button to switch to the column
marked "ty" at the lower edge of the screen in or-
der to include the trim of the respective stick in the
mixer input signal ("Tr" for trim or "P" for phase)
and/or to add series switching ("") for mixers ...
... and/or use the selection key of the left or
right four-way button to change into the column
marked with the switch icon ("
edge of the screen. To do this, tap the center
key of the right four-way button once again and as-
sign a switch as described in the section "Physical
control, switch and control switch assignments" on
page 68.
7. Using the selection key of the left or right four-
way button, switch to the column (" ") then tap the
center
SET
key of the right four-way button.
8. Define the mixer ratios on the second screen
page.
9. Return to the first page by using the center
key of the left four-way button.
"fr(om)"
After selecting a mixer line and a subsequent tap on
the center
SET
key of the right four-way button, select
one of the control functions, 1 ... 8 respectively 1 ...
12 or S, for the value field now in inverse video with
the selection keys of the right touch.
For the sake of clarity, control functions 1 ... 4 are
marked as follows when setting wing mixers:
C1
Throttle/airbrake stick
AI
Aileron stick
EL
Elevator stick
Program description - Free mixers
") on the lower
SET
ESC
205
Advertisement
Table of Contents
