Table of Contents
Advertisement
Wing mixer
Multi-flap menu
Brake settings
AI
RU
0%
FL
EL
+5%
+5%
Thermal
In the two limit positions of the three-stage switch the
elevator is moved symmetrically in this example with
+5 % (true to side). If, on the other hand, you use a
proportional control, the elevator is deflected accord-
ing to the degree for the control position.
Then make the settings for the "Speed" flight phase in
the same manner.
Notes:
•
The digital trims for aileron, elevator and rudder
are always "phase-specific" in operation at stand-
ard, regardless of these settings.
•
The current positions of the INC/DEC buttons,
CTL 5 + 6, which may be assigned to inputs 5
...8 or 5 ... 12, are stored in accordance with your
preference entered in the "Type" line, i. e. the po-
sitions are not lost when you switch flight phases,
nor even when you change models.
The particular advantage of these two transmitter
controls – which are fitted as standard to the
20
HoTT transmitter only, but can be fitted to the
mc-16
HoTT transmitter as an extra-cost op-
tion – lies in the fact that you can use one and the
same INC/DEC button as trim controls in all the
programmed flight phases, but – in contrast to a
position-related proportional control – the trim val-
ues are retained even if you switch models.
–––
–––
mc-
Programming examples - Using flight phases
307
Advertisement
Table of Contents
