Digital Output Modules - WAGO I/O System 750 Series Manual

4 Channel Digital Input Modules
750-402, -403, -408, -409, -414, -415, -422, -423, -428, -432, -433,
753-402, -403, -408, -409, -415, -422, -423, -428, -432, -433, -440
The input modules seize 4 Instances in Class (0x65).
8 Channel Digital Input Modules
750-430, -431, -436, -437, 753-430, -431, -434
Data bit
Channel
The input modules seize 8 Instances in Class (0x65).

5.2.2 Digital Output Modules

Digital output modules use one bit of data per channel to control the output of
the corresponding channel. These bits are mapped into the Output Process Im-
age.
When analog output modules are also present in the node, the digital image
data is always appended after the analog data in the Output Process Image,
grouped into bytes.
Each output channel seizes one Instance in the Discrete Output Point Object
(Class 0x66).
1 Channel Digital Output Module with Input Process Data
750-523
The output modules seize 2 Instances in Class (0x65).
WAGO-I/O-SYSTEM 750
DeviceNet
Bit 7 Bit 6 Bit 5
Bit 7 Bit 6 Bit 5
Data bit Data bit
DI 8 DI 7 DI 6
Channel Channel
8 7 6
Bit 7 Bit 6 Bit 5
Input Process Image
Bit 4 Bit 3 Bit 2
Data bit Data bit
DI 4
Channel Channel
4
Input Process Image
Bit 4 Bit 3 Bit 2
Data bit Data bit Data bit
DI 5 DI 4
Channel Channel Channel
5 4
Input Process Image
Bit 4 Bit 3 Bit 2
I/O Modules • 107
Bit 1 Bit 0
Data bit Data bit
DI 3 DI 2 DI 1
Channel Channel
3 2 1
Bit 1 Bit 0
Data bit Data bit
DI 3 DI 2 DI 1
Channel Channel
3 2 1
Bit 1 Bit 0
Status bit
not
„Manual
used
Operation"