WAGO I/O System 750 Series Manual page 56

56 • Fieldbus Coupler
Fieldbus Coupler 750-346
2. Create a New Project
1. Enter the "File" menu and click on menu point "New".
2. Select "DeviceNet" as the fieldbus system and confirm your selection by
Fig. 3-13: Select fieldbus
3. Enter Master
1.
2. For the DeviceNet Master interface card, click in the left-hand selection
3. Take the Master into the right-hand window by clicking on the "Add" but-
clicking on the "OK" button.
Enter a fieldbus master on the surface by clicking on the „Master" menu
point in the "Insert" menu.
A dialog window opens in which you can select the DeviceNet fieldbus card
in your PC.
Fig. 3-14: Select the DeviceNet fieldbus PCB / Insert Master
window on the corresponding entry to mark it.
ton and confirm by clicking on the "OK" button.
Now the fieldbus master is shown on the surface as a graphic.
p112501d
p112502d
WAGO-I/O-SYSTEM 750
DeviceNet