WAGO I/O System 750 Series Manual page 115

And the specialty modules represent 1x6 bytes output data and seize 1 In-
stance in Class (0x68).
750-404/000-005
The above Counter Modules have a total of 5 bytes of user data in both the In-
put and Output Process Image (4 bytes of counter data and 1 byte of con-
trol/status). The two counter values are supplied as 16 bits. The following ta-
bles illustrate the Input and Output Process Image, which has a total of 6 bytes
mapped into each image.
The specialty modules represent 1x6 bytes input data and seize 1 Instance in
Class (0x67).
And the specialty modules represent 1x6 bytes output data and seize 1 In-
stance in Class (0x68).
WAGO-I/O-SYSTEM 750
DeviceNet
Instance Byte Destination
n
Instance Byte Destination
n
Instance Byte Destination
n
Output Process Image
C
-
D0
D1
D2
D3
Input Process Image
S
-
D0
Counter Value of Counter 1
D1
D2
Counter Value of Counter 2
D3
Output Process Image
C
-
D0
Counter Setting Value of Counter 1
D1
D2
Counter Setting Value of Counter 2
D3
I/O Modules • 115
Remark
Control byte
not used
Counter Setting Value
Remark
Status byte
not used
Remark
Control byte
not used