58 •
Fieldbus Coupler
Fieldbus Coupler 750-346
5. Device Configuration
1. To configure the device, click on its graphic to mark it, then click on the
Fig. 3-17: Device Configuration
6. Load Configuration
1.
menu point "Device configuration" in the "Settings" menu.
A dialog window opens permitting you to proceed with the desired set-
tings.
To load the set configuration in the interface card, click on the master's
graphic to mark it, then click on the "Download" menu point in the "On-
line" menu.
p012506d
WAGO-I/O-SYSTEM 750
DeviceNet