WAGO I/O System 750 Series Manual page 57

4. Add a Slave
1. Enter a fieldbus slave on the surface by clicking on the "Device" menu
2. Move this mouse pointer to the graphic display of the fieldbus, then click
3. For the fieldbus coupler 750-346 click in the left-hand selection window on
4. Take this into the right-hand window by clicking on the "Add" button and
Fig. 3-16: Configuration
WAGO-I/O-SYSTEM 750
DeviceNet
point in the "Insert" menu.
The mouse pointer changes to the letter D with an arrow.
on the left-hand mouse key.
A dialog window opens permitting you to select a DeviceNet device.
3-15: Insert slave
the corresponding entry to mark it.
confirm by clicking on the "OK" button.
The configuration is displayed on the surface as a graphic.
Fieldbus Coupler
Fieldbus Coupler 750-346
g012503d
• 57
Fig.
p012504d