Chapter2 Setting Figures And Objects; Drawing A Figure - Mitsubishi Electric GOT 900 Operating Manual

2 SETTING FIGURES AND OBJECTS
CAHPTER2 SETTING FIGURES AND OBJECTS

2.1 Drawing a Figure

2
1)
3)
2 - 1
Describes how to draw a figure.
POINT
This chapter deals with only the drawing and editing of figures used in this manual.
For the drawing and editing of other figures, refer to the help function of GT
Designer.
When drawing a figure, click the icon of the figure you want to draw.
(1) When drawing a rectangle
2)
3)
(2) When drawing a scale
4)
5)
Click when drawing a rectangle.
Click when drawing a scale.
Click when entering a text.
When setting the attributes of a
figure or text, click the list box to
choose the attributes.
For details, refer to the GT Works
Version5/GT Designer Version5
Reference Manual.
1) Click the left mouse button at the start point of the
rectangle.
2) Drag the cursor to the end point.
3) Release the left mouse button. A rectangle appears.
1) As the scale setting dialog box appears, make
settings.
Scale points: Set the number of scale points.
Direction: Choose the scale direction.
Center line: Specify whether a line is drawn in the
scale center or not.
2) Click the OK button.
3) Press the left mouse button at the starting point of
drawing the scale.
4) Drag the cursor to the end point.
5) Release the left mouse button. The scale appears.
MELSOFT
2 - 1