Touch Screen Operated Panels - Mitsubishi Electric E1000 Series Service And Maintenance Manual

Hardware
3.3.2

Touch Screen Operated Panels

The tables below presents technical data for the touch screen operated panels.
Technical Data
Front panel, W x H x D
Mounting depth
Front panel seal
Rear panel seal
Touch screen material
Reverse side material
Weight
Serial port RS422/RS485 25-pin D-sub contact, chassis-mounted female with standard
Serial port RS232C
Ethernet
USB
Flash memory for
application
Real time clock
Real time clock battery CR2450 (UL and cUL: Sanyo or Panasonic)
Power consumption at
rated voltage
Display
Active area of display,
W x H
Fuse
Power supply
Ambient temperature
Storage temperature
Relative humidity
16
E1041
155.8 x 119 x 6 mm
57 mm (157 mm including clearance)
IP 66
IP 20
Touch screen: Polyester on glass, 1 million finger touch
operations.
Overlay: Autotex F157/F207.
Powder-coated aluminum
0.6 kg
locking screws 4-40 UNC.
9-pin D-sub contact, male with standard locking screws 4-40
UNC.
Shielded RJ 45
Host type A (USB 1.1), max output current 500 mA
12 MB (incl. fonts)
±20 PPM + error because of ambient temperature and supply
voltage.
Total maximum error: 1 min/month at 25 °C
Temperature coefficient: 0.004 ppm/°C
Minimum lifetime: 3 years
Normal: 0.15 A
Maximum: 0.35 A
TFT-LCD.
320 x 240 pixels, 64K colors.
LED backlight lifetime at the
ambient temperature of
+25 °C: >10,000 h.
70.1 x 52.6 mm
Internal DC fuse, 2.0 AT, 5 x 20 mm
+24V DC (20 - 30V DC). Power supply connector.
CE: The power supply must conform with the requirements
according to IEC 60950 and IEC 61558-2-4.
UL and cUL: The power supply must conform with the
requirements for class II power supplies.
Vertical installation: 0 ° to +50 °C
Horizontal installation: 0 ° to +40 °C
-20 ° to +70 °C
5 - 85 % non-condensed
E1043
2
TFT-LCD.
320 x 240 pixels, 16 greyscales.
LED backlight lifetime at the
ambient temperature of
+25 °C: >10,000 h.
Mitsubishi Electric, MA00758A