258
(11:)"There should be constant behind "Case" " ;
(12:)"Missing "Case" behind "Select" " ;
(13:)"Missing "expression" behind "Select Case" " ;
(14:)"Missing "End Select" statement
(15:) Illegal "Case" statement" ;
(16:)"Unfinished "Select" statement before "End Select" " ;
(17:)" "For" statement error: missing "For" before "Next" " ;
(18:)"Should be integer of char variable" ;
(19:)"Missing assign statement" ;
(20:)"Missing keyword "To" "
(21:)"Missing "Next" statement" ;
(22:)" "While" statement error: missing "While" before "Wend" " ;
(23:)Missing "Wend" statement" ;
(24:) "Illegal "Break" statement" ;
(25:)"Illegal "Continue" statement" ;
(26:)"Expression error" ;
(27:) Illegal operation object" ;
1010-1001a, Rev 02
The format of "If" statement is:
If [logic expression]Then
[ Else [If [logic expression] Then ] ]
EndIf
Any format other than this format will cause compile
error.
The format of "Select Case" statement is:
Select Case [expression]
Case [constant]
Case [constant]
Case [constant]
Case Else
End Select
Any format other than this format will cause compile
error.
The format of "For" statement is:
For [variable] = [initial value] To [end value] [Step]
Next [variable]
Any format other than this format will cause compile error.
The format of "While" statement is:
While [logic expression]
Wend
Any format other than this format will cause compile error.
"Break" statement can only be used in "For", "While", or "Select
Case" statement
"Break" statement takes one line of Macro.
"Continue" statement can only be used in "For" statement, or "While"
statement
"Continue" statement takes one line of Macro.
The mismatch of operation object in expression cause compile error.
For example :
Macro_Command main( )
int g[10]
For g[2] = 0 To 2
Sil ver Se ries In stal la tion & Op er a tion Man ual