Maple Systems Silver Series Installation And Operation Manual page 193

Rep re senting Data with Graph ics Ob jects
Format Options
No. above Dec.:
Decimal (with Raw
No. below Dec.:
data display)
Input low:
Input high:
No. above Dec.:
No. below Dec.:
Input low:
Decimal (with Do
Input high:
conversion)
Engineering low:
Engineering high:
No. above Dec.:
Input low:
Hex
Input high:
No. above Dec.:
Input low:
Binary
Input high:
No. above Dec.:
Mask
Input low:
Input high:
Range Description
specifies number of digits to display (for example, 2
digits displays -9 to 99); any number that cannot be
1-10
displayed with the specified number of digits is
represented with asterisks.
specifies number of digits to the right of the decimal
0-10
point.
-2147483648 to
This is the lowest data value allowed when the OIT
operator enters a number.
+2147483647
-2147483648 to This is the highest data value allowed when the OIT
operator enters a number.
+2147483647
1-10 specifies number of digits to the left of the decimal point.
specifies number of digits to the right of the decimal
0-10
point.
-2147483648 to
This is the lowest raw data value that is in the PLC data
register
+2147483647
-2147483648 to
This is the highest raw data value that is in the PLC data
register
+2147483647
This is the lowest data value that you would like
-2147483648 to
displayed on the OIT and the minimum value the OIT
+2147483647
operator is allowed to enter.
This is the highest data value that you would like
-2147483648 to
displayed on the OIT and the maximum value the OIT
+2147483647
operator is allowed to enter.
Not Apply (NA) 4 digits are used for 16 bit; 8 digits for 32 bit.
This is a decimal number which the OIT converts to
hexadecimal for establishing the lowest value that the
0 to
OIT operator is allowed to enter. For example, if you
+2147483647
d
want the minimum hex value to be 100n, then you would
enter value 256d.
This is a decimal number which the OIT converts to
hexadecimal for establishing the highest value that the
0 to
OIT operator is allowed to enter. For example, if you
+2147483647
d
want the maximum value to be 1000h, then you would
enter the value 4096d.
NA 16 digits are used for 16 bit; 32 digits for 32 bit.
This is a decimal number which the OIT converts to
binary for establishing the lowest value that the OIT
0 to
operator is allowed to enter. For example, if you want
+2147483647
d
the minimum binary value to be 1001b, then you would
enter value 9d.
This is a decimal number which the OIT converts to
binary for establishing the highest value that the OIT
0 to
operator is allowed to enter. For example, if you want
+2147483647
d
the maximum binary value to be 10100101b, then you
would enter value 165d
The number of asterisks to display. When OIT operator
is entering a new number, only asterisks are displayed
1-10
as the number is entered. Decimal format is used when
Mask is selected.
-2147483648 to This is the lowest data value allowed when the OIT
+2147483647 operator enters a number.
-2147483648 to
This is the highest data value allowed when the OIT
+2147483647 operator enters a number.
189
1010-1001a, Rev 02