Maple Systems Silver Series Installation And Operation Manual page 206

202
[CLR]
[ESC]
4. Just below the four control key options, is the ASCII checkbox. Select this when you want to
configure the Function Key to enter an alphanumeric character. When this checkbox is
selected, the Character: box is activated. Use this box to enter the ASCII character you want
to use.
5. The Hard Copy checkbox is for a printer option, which is not currently supported.
6. Click the Shape tab to display the Shape form.
7. Select either a shape or bitmap to represent the Function Key object. If you need more
information on how to do this, consult Chapter 6 "Creating Graphics Objects".
1010-1001a, Rev 02
Configures the Function Key as a Clear key. When pressed, it will clear the data displayed in
the Numeric Input Object or ASCII Input Object. Note: this key does not clear the actual
target PLC register until the Enter key is pressed.
Configures the Function Key as an Escape key. When pressed, it will exit the editing mode.
Sil ver Se ries In stal la tion & Op er a tion Man ual