Maple Systems Silver Series Installation And Operation Manual page 27

Cre ating Your First Project
12. On the main screen of EasyBuilder, you should see the rectangle that you just created move
and/or change size. This rectangle is used as a backdrop to the scale meter.
To create scale lines on Window#11
1. From the Draw menu, click Scale.
2. Click on an area somewhere inside Window #11. Create a scale shape by moving the mouse
cursor. Click again to permanently create the scale lines.
3. From the Edit menu, click Select.
4. Double-click somewhere on the scale lines. The Scale Object's Attribute dialog box appears.
5. In the Scale Style box, click Up.
6. Type 10 in the Division box.
7. Type 8 in the Meter length box.
8. Click on the Profile tab.
9. Enter 51 for the X position. Enter 16 for the Y position.
10. Enter 56 for the Width. Enter 28 for the Height.
11. Click OK.
12. On the main screen of EasyBuilder, you should see the scale that you just created move
and/or change size. This scale should be enclosed by the rectangle.
To create a meter display on Window#11
1. From the Parts menu, click Meter Display. The Create Meter Display Object dialog box
appears.
2. Type Meter Display in the Description box.
3. Click the Meter Display tab.
4. In the Style 2 Indicator box, click Up half.
5. In the Value Span box, enter 100.
6. Click OK.
7. On the main screen of EasyBuilder, you will see a white square outline that is attached to your
cursor in the work area. This represents the meter display just created. Click to place the
meter display in Window #11.
8. Double-click on the meter display. The Meter Display Object's Attribute dialog box appears.
9. Click on the Profile tab.
10. Enter 51 for the X position. Enter 16 for the Y position.
11. Enter 56 for the Width. Enter 28 for the Height.
12. Click OK.
23
1010-1001a, Rev 02