Maple Systems Silver Series Installation And Operation Manual page 60

56
The make same height
1. Select the objects you wish to make the same height. For this example, select the left and
center rectangle objects of Window_12
2. From the Edit menu, click Make Same Size, then Height or click the appropriate icon from
the Manager toolbar.
The make same size
1. Select the objects you wish to make the same size. For this example, select the left and center
rectangle objects of Window_12
2. From the Edit menu, click Make Same Size, then Both or click the appropriate icon from the
Manager toolbar.
1010-1001a, Rev 02
command
EasyBuilder always uses the height of the last object that was created as the basis for
the height. In this example, the left rectangle was created first, then the middle
rectangle, finally the right rectangle. See what happens when the make same height
command is applied to the center and right rectangles.
command
EasyBuilder always uses the size of the last object that was created as the basis for the
size. In this example, the left rectangle was created first, then the middle rectangle,
Sil ver Se ries In stal la tion & Op er a tion Man ual