Dis Playing And Using A Key Pad - Maple Systems Silver Series Installation And Operation Manual

204

Dis playing and Using a Key pad

Let's go through a sample project that uses one of the predefined keypads included in EasyBuilder to edit a Numeric
Input Object and an ASCII Input Object. This example will show you how to place these objects on a window
screen, and then use the keypad to edit the data registers.
The screen we create should look like the following when finished:
To create a sample keypad entry screen
1. Start a new project file, with the initial screen configured as the startup screen. Note: this is
the default setting. Display the initial screen in the work area of EasyBuilder.
2. From the Library menu, click Group, and then click Call up Library. The Group Library
dialog box appears.
3. Click on the Library Name: pull-down box to select the keypad library.
4. Click on part 5, and then click Place... The Group Library dialog box closes and the keypad is
placed onto the upper left corner of the work area of EasyBuilder.
5. Click on the part to move it to the lower half of the window screen.
1010-1001a, Rev 02
Sil ver Se ries In stal la tion & Op er a tion Man ual