Maple Systems Silver Series Installation And Operation Manual page 175

Rep re senting Data with Graph ics Ob jects
To create a Bit Lamp Object
1. From the Parts menu, click Bit Lamp. Or click the Bit Lamp icon in the Part1 toolbar. The
Create Bit Lamp Object dialog box appears.
2. Use the Description: box to enter a title for the Bit Lamp part. A description is not necessary
but does help you identify the purpose of the part.
3. In the Read address frame, select the PLC coil or OIT internal memory address.
4. In the Attribute frame, select how you want the Bit Lamp object to operate:
Function Option
Normal
Blinking on State 1
Blinking on State 0
Break time:
Description
Displays State 0 object when coil is clear; displays State 1 object when coil is set.
Displays State 0 object when coil is clear; blinks State 1 object when coil is set.
Displays State 0 object when coil is clear, blinks State 0 object when coil is set.
This is the time period for the blinking option in 1/10ths of a second increments. 0
= default of 1/10th second. Range: 0 to 2,147,483,647
171
1010-1001a, Rev 02