Maple Systems Silver Series Installation And Operation Manual page 190

186
7. In the Numeric attribute box, select how you want the data to be represented. The Input
low: and Input high: boxes don't apply unless Decimal format with Do conversion is
selected. The options are:
Format Options
Decimal (with
No. above Dec.:
Raw data
display)
No. below Dec.:
No. above Dec.:
No. below Dec.:
Input low:
Decimal (with
Input high:
Do conversion)
Engineering low:
Engineering high:
Hex No. above Dec.:
Binary No. above Dec.:
Mask No. above Dec.:
No. above Dec.:
Single Float
No. below Dec.:
No. above Dec.:
Double Float
No. below Dec.:
8. Click the Font tab to display the Font form.
9. Enter the color that you want for the digits displayed in the Color: box
10. Enter how you want the digits to be positioned in the Align: box. The choices are:
1010-1001a, Rev 02
Range Description
specifies number of digits to display (for example, 2 digits
1-10 displays -9 to 99); any number that cannot be displayed with
the specified number of digits is represented with asterisks.
0-10 specifies number of digits to the right of the decimal point.
1-10 specifies number of digits to the left of the decimal point.
0-10 specifies number of digits to the right of the decimal point.
-2147483648 to
This is the lowest raw data value that is in the PLC data
register
+2147483647
-2147483648 to
This is the highest raw data value that is in the PLC data
register
+2147483647
-2147483648 to
This is the lowest data value that you would like displayed on
the OIT.
+2147483647
-2147483648 to
This is the highest data value that you would like displayed
on the OIT.
+2147483647
Not Apply (NA) 4 digits are used for 16 bit; 8 digits for 32 bit.
NA 16 digits are used for 16 bit; 32 digits for 32 bit.
1-10 the number of asterisks to display
1-10 specifies number of digits to the left of the decimal point.
0-10 specifies number of digits to the right of the decimal point.
1-10 specifies number of digits to the left of the decimal point.
0-10 specifies number of digits to the right of the decimal point.
Sil ver Se ries In stal la tion & Op er a tion Man ual