Maple Systems Silver Series Installation And Operation Manual page 204

200
9. Click on the Profile tab. The Profile dialog box appears.
10. The Position settings refer to the overall location of the Animation Object on the window
screen.
11. The Size settings refer to the overall size of the Animation Object.
12. The Shape rectangle size settings refer to the size of the shape or bitmap that you are using.
13. You can also manipulate the position of each point along the path of movement. Click on the
points pull-down box to select the point you wish to change, then edit the X and Y positions.
14. Click OK. The Animation Object's Attribute form closes and the main screen of EasyBuilder
appears with the Animation part you just created on the screen. The shape you selected is
located at the first position on the path.
15. Once the part is placed onto the window, you can adjust the attributes by double-clicking on
the part to enter the Animation Object's Attribute dialog box.
The next chapter shows how to construct a keypad for editing PLC data registers.
1010-1001a, Rev 02
Sil ver Se ries In stal la tion & Op er a tion Man ual