Maple Systems Silver Series Installation And Operation Manual page 108

104
To set the popup window option for a common window
1. From the Edit menu, select System Parameters. The Set System Parameters dialog box
appears.
2. Select the General tab. In the Common Window frame box, select either Normal or Above
any others for the Popup Window box.
3. Click OK to return to the main screen of EasyBuilder.
The following illustration shows how this setting affects the operation of popup windows called from the common
window.
Popup window #21 was called from the common window with the Popup Window: Normal setting.
Window #13 is now called from the base window.
As expected, window #13 is displayed over window #21. The entire area of window #21 can be seen if the OIT
operator activates it by pressing it.
Now suppose that the same scenario is played out with the Popup Window: Above any others setting.
1010-1001a, Rev 02
Sil ver Se ries In stal la tion & Op er a tion Man ual