Maple Systems Silver Series Installation And Operation Manual page 245

Data and Rec ipe Trans fer Ob jects
To create a Recipe Transfer Object
1. From the Parts menu, click Recipe Transfer. Or click the Recipe Transfer icon in the Part2
toolbar. The Recipe Transfer Object dialog box appears.
2. Use the Description: box to enter a title for the Recipe Transfer part. A description is not
necessary but does help you identify the purpose of the part.
3. In the Write address frame, select the PLC registers that are to be saved or downloaded to.
The No. of words box is used to specify the total number of 16-bit registers used. The range
is 1 to 32767. The Device Address you specify for the PLC register is also the starting
register used for the OIT's RWI (Indexed Address Recipe Word) data register.
4. In the Attribute frame, for the Direction: setting click Download or Save. Use the
Download setting to send data stored in the OIT's RWI data registers to the specified PLC
registers. Use the Save setting to retrieve data stored in PLC registers to be stored in the
OIT's RWI data registers.
241
1010-1001a, Rev 02