Maple Systems Silver Series Installation And Operation Manual page 194

190
No. above Dec.:
No. below Dec.:
Single Float
Input low:
Input high:
No. above Dec.:
No. below Dec.:
Double Float
Input low:
Input high:
9. Click the Shape tab to configure a shape or bitmap that is displayed behind the number.
10. Click the Font tab to display the Font form.
\
11. Enter the color that you want for the digits displayed in the Color: box.
12. Enter how you want the digits to be positioned in the Align: box. The choices are:
• Right Adjust - aligns the number to the right margin of the part.
• Left Adjust - aligns the number to the left margin of the part.
• Leading Zero - inserts leading zeroes
13. Enter the size of the digits in the Font: box.
14. Click OK. The Numeric Input Object form closes and the main screen of EasyBuilder appears
with the cursor tied to a rectangular outline of the part you just created at the upper left corner
of the screen. Move the part to the desired location on the window.
1010-1001a, Rev 02
1-10 specifies number of digits to the left of the decimal point.
specifies number of digits to the right of the decimal
0-10
point.
-2147483648 to
This is the lowest data value allowed when the OIT
operator enters a number.
+2147483647
-2147483648 to
This is the highest data value allowed when the OIT
operator enters a number.
+2147483647
1-10 specifies number of digits to the left of the decimal point.
specifies number of digits to the right of the decimal
0-10
point.
-2147483648 to
This is the lowest data value allowed when the OIT
operator enters a number.
+2147483647
-2147483648 to
This is the highest data value allowed when the OIT
operator enters a number.
+2147483647
Sil ver Se ries In stal la tion & Op er a tion Man ual