Op Tional Set Tings - Maple Systems Silver Series Installation And Operation Manual

Cre ating Win dows
2. Highlight the Common Window and click Settings. The Window Setting dialog box
appears.
3. As you can see, most of the parameters for a common window are disabled and cannot be
changed. Window #6 is always reserved for the common Window. Although the Style
settings are active, none of these settings affects the operation of the common window.
4. Press OK. The Open Window dialog box reappears with the Common Window selected.
5. If you wish to open the common window, click Open. Otherwise, click Close to return to
the main screen of EasyBuilder.

Op tional set tings

Dis play ing popup win dows from the com mon win dow
As with full screen base windows, popup windows can be called from the common window. In the System
Parameters settings, you have the option of selecting any popup windows called from the common window to be
displayed normally or to display above any popup windows called from a base window. If the Normal setting is
selected, then the popup window called from the common window is displayed on top of any popup windows
already on the OIT display. Popup windows displayed after common popup window are displayed over it.
If the Above any others setting is selected, then the popup window called from the common window is displayed
above any popup windows that may be called from a base window.
103
1010-1001a, Rev 02