Maple Systems Silver Series Installation And Operation Manual page 57

Using EZware-500
2. From the Edit menu, click Align, then Top or click the appropriate icon from the Manager
toolbar.
3. From the Edit menu, click Undo to put the objects back in their original position.
Using the align bottom
1. Select the objects you wish to align. For this example, select the three rectangle objects of
Window_12
2. From the Edit menu, click Align, then Bottom or click the appropriate icon from the
Manager toolbar.
3. From the Edit menu, click Undo to put the objects back in their original position.
Using the align horizontal center
1. Select the objects you wish to align. For this example, select the three rectangle objects of
Window_12
command
command
53
1010-1001a, Rev 02