Maple Systems Silver Series Installation And Operation Manual page 225

Bar Graphs, Me ters, and Trends
Plot point:
Device type:
Device
Read address:
address:
BIN or BCD
Device type:
Scroll control:
Device
address:
BIN or BCD
Device type:
Hold control:
Device
address:
3. Click the Plot tab to display the Plot Display form.
4. Use the Description: box to enter a title for the XY Plot part. A description is not necessary
but does help you identify the purpose of the part.
5. In the Channel pull-down box, select each channel to modify the attributes for the channel.
The XY Plot only supports channel 0.
Function Range
Color:
H. Zero: 1 to 32767
10 to 255 Number of times that a sampling occurs per page.
PLC or OIT internal memory address
This is the starting address that is read from to get the data to plot.
Select binary (BIN) or BCD format
If Multiple pages is selected, this 16-bit register represents the
position the window is located on the multi-page graph. If the value
is 0, then the window is at the foremost or front of the graph. For
each increment of this value, the window moves back by one plot
point.
PLC or OIT internal memory address
Select binary (BIN) or BCD format
If Multiple pages is selected, this coil register is used to enable the
hold function. If the coil is set, then the hold function is activated.
PLC or OIT internal memory address
Description
Selects the color used for that channel.
The value at which the plot will reach the left side of the Horizontal Axis.
221
1010-1001a, Rev 02