Panasonic JB-3300 Technical Manual page 388

2. 3 Carriage Limit Calibration
The purpose of this routine is to measure the carriage limit. To run it,
enter "3" from the maintenance menu. The following display will appear:
3. CARRIAGE LIMIT CALIBRATION
Insert alignment diskette in drive x:
Press any key when ready (or press ESC key to return to the
maintenance menu)
To run the routine,
and press any key.
insert the maintenance diskette in the drive indicated,
The screen will display the following sub-menu.
1. HEAD position at TRACK OO (Carriage
2. HEAD position at TRACK 39 (Carriage
3. EXIT
SELECT MENU ? __
Limit check)
limit check)
"1" to move the head to TRACK OO. The
following display will appear:
HEAD position = TRACK OO
Check carriage limit
Press any key to return to the sub-menu
Press any key to stop the routine and return
Enter "2" to move the head to TRACK 39. The
to the sub-menu.
following display will appear:
HEAD position = TRACK 39
Check carriage limit
Press any key to return to the sub-menu
Press any key to stop the routine and return
VI - 31
to the sub-menu.