Loading Diagnostic Pyogram 2; Change Menu 2; Logic Unit - Panasonic JB-3300 Technical Manual

9.5.3 Loading diagnostic program
CRT Displays or
T Pp .
step est Procedures Printer Print Outs
1 Insert the DIAG- Current date is If you don't see these messages,
NOSTIC disk in X-XX-19xx eject the disk from the drive.
drive A, then Enter new date: _ Make sure that the disk is
turn the computer's labelled "DIAGNOSTIC" and that
power switch to ON. you inserted it into the drive
correctly. If it is the correct
disk and it was properly insert-
2 Press key. Current time is ed, the problem could be in the
X:XX:XX.XX disk drive or in the computer's
Enter new time: _ logic unit. The system unit
should be serviced.
3 Press key. A> _
4 Type ENTER THE TYPE OF Be sure to select the correct
KEYBOARD? number corresponding to your
fa}[}[a][g] ¥ (1=USA 2=SWEDEN countrys keyboard as displayed
3=DENMARK ...) on the above screen. If you
make an incorrect country key-
board. Selection, the screen
will display different character
during the keyboard test.
DO YOU WANT A If you want to print the
5 Type PL + Y P
YP [2] PRINTOUT results ...
STOP WHEN AN ERROR If you want to stop the program
6 Type ¥ OCCURS? (Y/N) after an error has been found.
type y. Type n if you want the
program to continue.
7 Press DIAGNOSTIC MENU
1. TEST ALL
DEVICES
2. TEST AUTOMATI-
CALLY
3. CHANGE MENU
4. ERROR LISTING
5. EXIT
SELECT MENU? _
I - 74