System Unit/Floppy Disk Drive Unit 2 - Panasonic JB-3300 Technical Manual

Step 3
Removing Front Panel 1. Lift up Plasma Display Unit [G].
2. Pull up Left Front Panel [H] from
the bottom, lifting it up from
System Unit.
3. Pull up Right Front Panel [TI]
from the bottom, lifting it up
H from System Unit.
Note: By pressing the top portions
of front panels [H] and [TI]
downward with both hands,
. claws on their bottoms can be
Figure 5-4 released from System Unit.
Step 4
Removing Plasma Display Unit 1. Remove the four screws [J] on the
softeners attached to either side
of the plasma display.
signal 2. Remove the FG wires at both ends
Cable of the softener (by loosening
screw K).
DC Signal Cable
FG Cord
3. Remove the DC single cable and
Keyboard °
Latch plasma signal cable.
Cable
Step 5
Removing Upper Cover 1. Remove mounting screws [L] from
Upper Cover.
2. Remove Option Connector Door [E].
3. Remove Keyboard Latch Assemblies
[F].
I - 17