Nat - Tenda D840 User Manual

5.2.3 NAT

5.2.3.1. Virtual Server
1) Click "NAT" → "Virtual
Server" to display the
window shown in the
right figure. Here, you
can add or delete your
virtual server settings.
By default, the external
networks cannot access
the IP address of your
internal network.
However, if you need
such access by the
external networks (for
example, you need to
set up the server or
support some special
applications), you
should enable this
function to allow the
access by external
networks.
D840R ADSL2+ Router User Guide
51