Ip-Settings; Name Server Addresses (Dns); Dhcp - TIPTEL .com 410 Installation Manual

IP-settings

IP-Address, subnet mask
In order for the network to communicate with the telephone system, the system must
be assigned an IP address and a network via the subnet mask. By default the IP ad-
dress is set to 192.168.34.100 and the subnet mask to 255.255.255.0. In this menu
you can change the IP address and subnet mask as required.
If you want to set up a new network, you do not need to make the necessary
changes here. If you want to integrate the telephone system into an existing network,
you have to change the IP address and subnet mask of your network. The DHCP
server should be deactivated for integration in an existing network. In case of any
questions please contact your local network administrator.
Note: The telephone system will automatically restart after a change.
Use of the standard gateway
This function is only to be used if you want to reach the telephone system via another
network (e.g. the internet) or when the telephone system should transfer information
to another network (e.g. a server application on telephone charges).
In this case the IP address of the external router must be entered in this field.
Note: For these applications you should only use fixed IP addresses. And you
should disable the DHCP server integrated with you telephone system.

Name server addresses (DNS)

DNS-server
Under „Preferred DNS-server" please enter the IP-address of the DNS-server to be
used. In most cases this is the address of the router/gateway used. But you can also
enter up to two different DNS-servers, which may be contacted by the device.

DHCP

You can also use your telephone system as your network's DHCP-server. This means
that computers in your network no longer require a fixed IP-Address. Instead they will
be assigned with an IP-address during the start-up of your telephone system. You
telephone system is capable of assigning IP-addresses to the number of clients you
enter in the corresponding field.
In order to be able to use the DHCP please tick the box „Enable DHCP-server".
Menu: Network
106